If you want to optimise the energy you are using for heating or cooling your home, you may want to strongly consider the benefits of installing a heat pump system. However, before you schedule an installation, you want to make sure the pump is sized properly. Make sure the heat pump can handle your home’s heating and cooling needs. If the device is too small, you cannot accomplish this objective.

How a Heat Pump Works

Heat pumps operate much like fridges. To give you an idea of how the pump works, the following steps represent each phase of operation:

  • A refrigerant flows through indoor and outdoor coils.
  • In the heating mode, the refrigerant (which is a liquid) flows to an outdoor coil before passing through an expansion valve.
  • The liquid converts to a gas, which results in a quick cooling of the refrigerant.
  • The refrigerant absorbs the heat energy from the air.
  • As it flows toward the indoor coil, the gas is compressed in a compressor, increasing the temperature and pressure.
  • The gas flows through indoor coils, emitting heat.

The Types of Heat Pump Devices

Professionals who offer recommended renewable energy services in Newton Abbot add that heat pumps may be configured in one of the following ways:

  • As air-to-air units
  • As ground-to-air units
  • As water-to-air heat pumps

A High Heat Output to Energy Input Ratio

Because a heat pump moves the heat but does not generate it, it maintains a high heat output to energy input ratio, thereby making the device especially popular for energy use and saving money.


 

Leave a comment